bellahas.blogg.se - Teamviewer wake on lan windows 10 2 hard drives

The command to wake your PC up is: sudo etherwake -i eth0 AA:BB:CC:DD:EE:FF (click on the details of that connection to reveal the IP and MAC listed as AA:BB:CC:DD:EE:FF in the example ). Once this is installed, you have to go to the PC and note the MAC address of the LAN adapter the RPI is connected to. The best way to do this is to use the etherwake: sudo apt-get install etherwake This is important because we have to force the Magic Packet to go through the eth0 instead of WIFI. If you configured the RPI in the same way as in the Guide 2 (see step 2) your microcomputer will have a link via LAN with the computer but will use the WIFI to connect to the internet. Feel free to connect via Facebook, Twitter or Google+ Love the sound of this setup? Follow the for more.

a PC which has a LAN port with Wake On Lan support (most of them).

a Raspberry Pi with the ethernet port and WIFI connectivity.

When the Magic Packet is received by the PC via LAN cable, it wakes up. The RPI is constantly awake and is able to receive a request to wake the PC through the LAN interface. If your PC is connected to the internet via WIFI, and the card does not support Wake on LAN, you have no other options of waking up the PC remotely.

Running a LAN cable may not always be a feasible solution. You can wake up the PC within seconds when needed, saving a lot of power in the process. This means you no longer have to keep your PC on, to access the files remotely.

It can be done on the local network as well as from the internet. You can wake up any PC linked to the Raspberry Pi remotely. The Raspbian image has changed, and the old version is no longer valid. First of all, this is an updated revision of my previous tutorial.